Table of Contents
Advertisement
STATUS PAGE
Touchscreen display winch status screen
grey when it is applied (winch stopped).
FAULT/WARNING: Indicates a drive fault or warning. In case of a fault, the drive must be reset before it can be
referenced for operation can occur. In case of a warning, the drive can be referenced.
UP LIMIT: Green when the winch is on the up limit switch, grey if it is not on the limit
DOWN LIMIT: Green when the winch is on the down limit switch, grey if it is not on the limit.
DRIVE RESET: Touchbutton used to reset the inverter drive after a fault or warning has occurred and the
condition has been cleared.
The Displays on the right of the screen are as follows:
POSITION: Shows the current height of the winch batten in decimal feet or millimeters above the reference point.
TARGET: Shows the target height for the winch batten in decimal feet or millimeters above the reference point.
SPD-DEMAND: Shows the winch speed (in feet per minute or millimeters per second) which is being demanded
by the control system.
SPD-ACTUAL: Shows the winch speed (in feet per minute or millimeters per second) at which the winch is
actually moving.
CURRENT: Shows the amperage draw of the inverter drive as a percentage of its full load current.
The BASE PAGE jump button is touched to return to the winch base Screen.
Design, Manufacture and Installation of Theatrical Equipment Worldwide
(315) 451-3440
Fax (315) 451-1766
Rev 1: February 13, 2007
SCENECONTROL 100 OPERATING INSTRUCTIONS
Touching the STATUS PAGE button on the
winch base screen will open the status
screen. This screen contains indicators and
displays to show the status of the winch and
its associated inverter drive. The indicators
on the left of the screen are as follows:
MOTOR TURNING: Green if the motor is in
motion, grey if it is not moving
DRIVE READY: Green if there is power to
the drive, grey if the drive is not powered.
REFERENCED:
Green if the drive is
referenced (ready to operate), grey if it is
not referenced.
AT TRGT POS: Green if the winch is at its
target position, grey if it is not at target.
BRAKE RELEASED:
motor brake is released (winch in motion),
www.jrclancy.com
PAGE 8
Green when the
Advertisement
Table of Contents
