Cisco ASA 5506-X Installation Manual page 39

Connect to the Console Port
Figure 28: ASA 5506H-X Console Port Connection
Mini USB Type B console port
1
3 USB Type A
Step 4 Connect the end of the cable with the DB-9 connector (or USB Type A) to the terminal or PC. If your terminal or PC has
a console port that does not accommodate a DB-9 connector, you must provide an appropriate adapter for that port.
The LED for the console port turns green and within a few moments the Found New Hardware Wizard appears.
Step 5 Follow the instructions to complete the driver installation.
Step 6
To communicate with the ASA, start a terminal emulator application. This software should be configured with the
following parameters:
• 9600 baud
• 8 data bits
• no parity
• 1 stop bit
Online Only
Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide
Connect to the Console Port with Microsoft Windows
Mini USB Type B to USB Type
2
A console cable
35