IKEA Konsistens Manual page 12

OVEN CONTrOLS
Setting the Clock
The set clock control is used to set the clock. The
clock may be set for 12 or 24 hours display opera-
tion. The clock is preset at the factory for 12 hour
display. When the oven is first plugged in, or when
the power supply to the oven has been interrupted,
the timer in the display will flash.
To set the clock (example below for 1:30):
1. Press Set Clock. CLO will appear in the display.
2. Press 1 3 0 on the keypad to set the time of day
to 1:30. CLO will stay in the display.
3. Press STarT. CLO will disappear and the clock
will start.
Setting Control for Silent Operation
Delay Start and Self Clean keys control the silent
control operation feature. The silent control opera-
tion feature allows the oven control to be operated
without sounds or beeps whenever necessary. If
desired the control can be programmed for silent
operation and later returned to operating with all
the normal sounds and beeps.
To change control from normal sound
operation to silent control operation:
1. To set oven for normal or silent operation, press
and hold Delay Start. -- -- will appear and
DELAY will flash in the display. After 6 seconds
bEEP On or bEEP OFF will appear in the display.
2. Press Self Clean to switch between normal sound
operation and silent operation mode. The display
will show either bEEP On or bEEP OFF.
If bEEp On appears, the control will operate
with normal sounds and beeps.
If bEEp OFF appears, the control is in the silent
operation mode.
3. Press STarT to accept the change or press OFF
to reject the change.
12
Setting 12 or 24 Hour Time of Day
Display
1. Press and hold set clock for 6 seconds. CLO will
appear in the display.
2. Continue holding the key until 12Hr dAY or 24Hr
dAY appears in the display and the control beeps
once.
3. Press Self Clean to switch between the 12 and
24 hour time of day display. The display will
show either 12Hr dAY or 24Hr dAY.
4. Press STarT to accept the change or press OFF
to reject the change.
5. Reset the correct time as described in this
section. If the 24 hour time of day mode was
chosen, the clock will display time from 0:00
through 23:59 hours.
Setting Continuous Bake or 12 Hour
Energy Saving
The Timer On-Off and Self Clean keys control the
continuous bake or 12 hour energy saving features.
The oven control has a factory preset 12 Hour En-
ergy Saving feature that shuts off the oven if the
oven control is left on for more than 12 hours. The
oven can be programmed to override this feature
for Continuous Baking.
To set the control for continuous bake or 12
hour energy saving:
1. Press and hold Timer On-Off for 5 seconds.
12Hr OFF or StAY On will appear in the display
and the control will beep once.
2. Press Self Clean to switch between the 12 hour
energy saving and continuous bake features.
3. Press STarT to accept the change (display will
return to time of day) or press OFF to reject the
change.
4. 12Hr OFF indicates the control is set for the 12
hour energy saving mode. StAY On indicates the
control is set for the continuous bake feature.
IMpOrTaNT
Changing to continuous bake or 12 hour mode
does not change how the cooktop controls
.
operate
EN