Jacking And Changinga Tire - Chrysler 300 2021 Owner's Manual

3. Rotate the fastener securing the spare tire
counterclockwise to remove it.
Spare Tire Fastener
4. Remove the spare tire.
5. Rotate the fastener securing the jack
counterclockwise to remove it.
Jack Fastener
6. Remove the jack and lug wrench assembly
from under the spare tire. Turn the jack
screw to the left to loosen the lug wrench,
and remove the wrench from the jack
assembly.
WARNING!
A loose tire or jack thrown forward in a
collision or hard stop could endanger the
occupants of the vehicle. Always stow the jack
parts and the spare tire in the places
provided. Have the deflated (flat) tire repaired
or replaced immediately.
J A C A T
ACKING ND HANGING
WARNING!
Carefully follow these tire changing warnings
to help prevent personal injury or damage to
your vehicle:
Always park on a firm, level surface as far

from the edge of the roadway as possible
before raising the vehicle.
Turn on the Hazard Warning Flashers.

WARNING! (Continued)
Apply the parking brake firmly and set an

automatic transmission in PARK.
Chock the wheel diagonally opposite the

wheel to be raised.
Never start or run the engine with the

vehicle on a jack.
Do not let anyone sit in the vehicle when it

is on a jack.
Do not get under the vehicle when it is on a

jack. If you need to get under a raised
vehicle, take it to a service center where it
can be raised on a lift.
IRE
Only use the jack in the positions indicated

for lifting this vehicle during a tire change.
If working on or near a roadway, be

extremely careful of motor traffic.
To assure that spare tires, flat or inflated,

are securely stowed, spares must be
stowed with the valve stem facing the
ground.
(Continued)
IN CASE OF EMERGENCY 215
7