Chrysler 300 2021 Owner's Manual page 113

Adaptive Cruise Control (ACC) Operation
The buttons on the right side of the steering
wheel operate the ACC system.
Adaptive Cruise Control Buttons
1 — CANC/Cancel
2 — Fixed Speed Cruise Control On/Off
3 — Adaptive Cruise Control (ACC) On/Off
4 — Distance Setting Decrease
5 — SET (+)/Accel
6 — RES/Resume
7 — SET (-)/Decel
8 — Distance Setting Increase
Adaptive Cruise Control (ACC) Menu
The instrument cluster display will show the
current ACC system settings. The information it
displays depends on ACC system status.
Push the ACC on/off button until one of the
following appears in the instrument cluster
display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
"Adaptive Cruise Control Off."
Adaptive Cruise Control Ready
When ACC is activated, but the vehicle speed
setting has not been selected, the display will
read "Adaptive Cruise Control Ready."
Adaptive Cruise Control Set
When the SET (+) or the SET (-) button is
pushed, the display will read "ACC SET."
When ACC is set, the set speed will show in the
instrument cluster display.
The ACC screen may display once again if any of
the following ACC activity occurs:
System Cancel

Driver Override

STARTING AND OPERATING
System Off

ACC Proximity Warning

ACC Unavailable Warning

The instrument cluster display will return to the
last display selected after five seconds of no
ACC display activity.
Activating Adaptive Cruise Control (ACC)
The minimum set speed for the ACC system is
20 mph (32 km/h).
When the system is turned on and in the ready
state, the instrument cluster displays "ACC
Ready."
When the system is off, the instrument cluster
display will read "Adaptive Cruise Control (ACC)
Off."
NOTE:
You cannot engage ACC under the following
conditions:
When the brakes are applied

When the parking brake is applied

When the automatic transmission is in PARK,

REVERSE or NEUTRAL
111
4