SMART Embedded Computing RTM-ATCA-747x-10G Series Installation And Use Manual page 12

About this Manual
Conventions
The following table describes the conventions used throughout this manual. .
Notation
0x00000000
0b0000
bold
Screen
Courier + Bold
Reference
File > Exit
<text>
[text]
...
.
.
.
..
|
12
Description
Typical notation for hexadecimal numbers (digits are 0 through F), for
example used for addresses and offsets
Same for binary numbers (digits are 0 and 1)
Used to emphasize a word
Used for on-screen output and code related elements or commands.
Sample of Programming used in a table (9pt)
Used to characterize user input and to separate it from system output
Used for references and for table and figure descriptions
Notation for selecting a submenu
Notation for variables and keys
Notation for software buttons to click on the screen and parameter
description
Repeated item for example node 1, node 2, ..., node 12
Omission of information from example/command that is not necessary at
the time
Ranges, for example: 0..4 means one of the integers 0,1,2,3, and 4 (used
in registers)
Logical OR
Indicates a hazardous situation which, if not avoided, could result in death
or serious injury
Indicates a hazardous situation which, if not avoided, may result in minor
or moderate injury
RTM-ATCA-747x-10G Installation and Use (6806800S80F)
About this Manual