Service; Cleaning; Update Software - Philips NeoPix Ultra 2 User Manual

10 Service

Cleaning

DANGER!
Instructions for cleaning!
Use a soft, lint-free cloth. Never use
liquid or easily flammable cleansers
(sprays, abrasives, polishes, alcohol,
etc.). Do not allow any moisture to
reach the interior of the projector.
Do not spray the projector with any
cleaning fluids.
Wipe over the surfaces gently. Be
careful that you do not scratch the
surfaces.
Cleaning the lens
Use a soft brush or lens cleaning paper for
cleaning the lens of the projector.
DANGER!
Do not use any liquid cleaning agents!
Do not use any liquid cleaning
agents for cleaning the lens, to avoid
damaging the coating film on the lens.

Update software

The latest software of the projector can be
found on www.philips.com/support for you
to get the best features and support from the
projector.
Before you update the software of the
projector, check the current software version:
• Press to access the settings options
and go to Software Version.
18
Update SW through USB
CAUTION!
Do not turn off the projector or remove
the USB flash drive during the update.
1 Check the latest software version on www.
philips.com/support. Find your product
(model number: NPX643/INT), and locate
'Software and drivers'.
2 Download the zipped software file, then
unzip and save it in the root directory of the
USB flash drive.
3 Connect the USB flash drive (FAT32
formatted) to the projector.
4 Press to access the settings options
and go to Firmware Upgrade.
5 Follow the on-screen instructions to
complete the update.
Philips · NeoPix Ultra 2TV