Viessmann SCU345 Manual page 61

Language
LANG
Language
Adjustment range: dE, En, ES, Fr
Factory setting: En
In this adjustment channel, the menu language can be
chosen.
• dE : German
• En : English
• ES : Spanish
• Fr: French
SD card
COM
If an SD card is used, is shown on the display. If
COM
the SD card is full, is fl ashing.
OSDC
SD card
Selection: ON / OFF
Factory setting: OFF
Starting the logging
Î Insert the SD card into the slot
Logging will start immediately.
Î Adjust the desired logging interval LOGI
OSDC / LOGI
Logging interval
Adjustment range: 1 ... 1200 s
Factory setting: 60 s
OSDC / LLOG
Linear logging
Selection: ON / OFF
Factory setting: OFF
When LLOG is activated, data logging will stop if the
capacity limit is reached. The message CFULL will be
displayed.
When LLOG (linear logging) is deactivated, the oldest
data logged onto the SD card will be overwritten as
soon as the capacity limit is reached.
OSDC / REMC
Safely remove card
Adjustment range: ON / OFF
Factory setting: OFF
Completing the logging process
Î Select the menu item REMC
Î After -REM is displayed remove the card from
the slot
OSDC / FORM
Format card
Formatting the SD card
Î Select the menu item FORM
Î During the formatting process, --FORM will be
displayed.
The content of the card will be deleted and the card
will be formatted with the FAT 16 fi le system.
Messages possible Description
FSYS File system error
CTYP Card type is not supported
WRIT Error during writing
NOCRD No card in slot
LOGG Logging is possible
WRITP Card is write-protected
CFULL Card full
RTIME Remaining logging time in days
REMC Safely remove card command
-REM Card is being removed
FORM Formatting SD card command
-FORM Formatting in progress
LOGI Logging interval in seconds
LLOG Linear logging
Note
Because of the increasing size of the data
packets, the remaining logging time does not
decrease linearly. The data packet size can
increase, e. g. with the increasing operating
hours value.
61