Hdmi Arc Not Function – General Checking - Sony KD-43XE7 Series Service Manual

3.7.8 HDMI ARC Not function – General Checking
HDMI ARC
Not Function
Confirm Source (Player)
ARC Condition/Capability
[OK] Source Support ARC &
ARC Source function Normally
Bravia Sync (CEC)
TV setting
[OK] CEC Setting On
Factory Reset &
Change Proven OK
HDMI cable
[NG] ARC not functioning
Physical
appearance Check On
HDMI connector
[OK] Connector no abnormality
Check impedance
Of R4018 Resistor
during AC OFF
[OK] R4036 ≈ 180Ω ±5%
[NG] Source Not Support ARC /
ARC Source not function Normally
[NG] ARC not functioning
[NG] CEC setting Off
Turn TV Bravia Sync
[OK] ARC functioning
[NG] Connector abnormal
HDMI Connector Broken.
Replace & Re-verify
[NG] ARC not functioning
[NG] R4036 ≠ 180Ω
Resistor Broken.
Replace & Re-verify
[NG] ARC not functioning
Replace B-Board
And Re-verify
Checking condition:
- TV ON & HDMI Source ON except if the flow mentioned is AC OFF.
- TV HDMI input connected to HDMI source (Player etc.)
- TV Input Selection: HDMI
[OK] ARC functioning
Change to ARC
Compatible source
"On"
[OK] ARC functioning
[OK] ARC functioning
END
66