+5V Power Failure Analysis – Hdmi1 And Hdmi3 General Checking - Sony KD-43XE7 Series Service Manual

3.7.3 +5V Power Failure Analysis – HDMI1 and HDMI3 General Checking
[OK] Impedance ≈ 1K Ω
[NG] Impedance ≠ 100kΩ ±5%
[OK] Picture recovered
+5V Power
Failure Analysis
[NG] Impedance ≠ 1K Ω
Check impedance of
Resistor during AC OFF
HDMI1: R4025
HDMI3: R4024
[NG] No picture
[OK] Impedance ≈ 100kΩ ±5%
Check impedance of
Varistor during AC OFF
HDMI1: VR4010
HDMI3: VR4009
Replace Broken Varistor
and Re-verify
END
Checking condition:
- TV ON & HDMI Source ON except if the flow mentioned is AC OFF.
- TV HDMI input connected to HDMI source (Player etc.)
- TV Input Selection: HDMI
Replace Broken Resistor
[OK] Picture recovered
and Re-verify
Go to
"HPD Power Failure Analysis"
Page
[NG] No picture
58
58