Atmos Cec Disable - Sony KD-43XE7 Series Service Manual

03.14 ATMOS CEC Disable

1) Go to "ATMOS CEC DISABLE" and Press "" or "" button to select '0' or 'A'
2) After select the option that you wish, press "Home" to confirm the selection.
ATMOS_CEC_DISABLE (EEPROM 0x30A0)
Data : [0/A] Default : 0
Purpose : Data [A] is able to skip Atmos judgment by
CEC <Report Short Audio Descriptor> comes from the
amplifier, and to set Atmos EDID as the service c/m to an
amplifier supports Atmos but it reply NO Atmos.
Remarks :
1) This data is not changed after software update or AC-
Off-On, only change from service menu.
2) Need to turn AC off/on after change setting in order
algorithm to take effect.
Option
The TV checks whether HDMI1(ARC) is connected to an
0 (default) amplifier that support ARC & Atmos or not, and sets either
Atmos EDID/ Non Atmos EDID.
The TV skip Atmos checking when HDMI1(ARC) is connected
A to an amplifier that support ARC and set Atmos EDID even when
amplifier doesn't support Atmos.
Execution Effect
132