Table of Contents
Advertisement
Panasonic Digital Business System - Overview
April 1997
180 System Speed Dial Availability
The new versions of software allow for the DBS to be configured for 2 x 90 SSD groups or 1
x 180 SSD group. This is set via programming and requires a power off/on reset to take
effect. Changing this setting will not erase the contents of the SSDs.
The SSD numbering changes dependant upon the mode selected.
With 2 x 90
the SSD locations are numbered
With 1 x 180
the SSD locations are numbered
Call Charge Range Increased
For meter pulse detection call charging the allowable cost has been increased from 99.9p per
unit to 999.9p per unit. The step controlling the charge remains otherwise unchanged.
Suppression Of Call Forward Indications
It is now possible to suppress the display of call forward indication from the second line of a
keyset LCD and green LED indication on BLF keys, when an extension sets call forward. This
is useful when many users will be setting forward to voicemail and do not want these
indications present.
When suppressed the DND/CF LED on keysets will still be illuminated to indicate call forward
status.
ISDN DDI Group Name Display
The DDI group name can be displayed on the second line of a keyset LCD when an incoming
DASS II DDI call is received by a DDI group. This will clear after answer.
Group name will override CLI display.
Absence Message Entry Without A DSS Console
Absence messages can now be set by the operator extension using the keypad to enter the
characters. Maximum message length is 15 digits.
Call Forward No Answer Setting From Menus On The VB3411LDS
Call forward no answer option is now available from the function menu of the large display
keyset.
00~89 in each group
100~189,200~289
25
Issue 6
Advertisement
Table of Contents
