Internet - D-Link COVR User Manual

Section 3 - Configuration

Internet

Click on the Internet icon to bring up more details about your Internet
connection. Click IPv4 or IPv6 to see details of the IPv4 and IPv6 connection
respectively.
The Home page displays whether or not the master COVR Point is currently
connected to the Internet. If it is disconnected, click Click to repair to bring up
Wizard on page 16
the setup wizard, refer to for more information.
Click Release IP Address to release the current IP address and disconnect
from the Internet. If you wish to reconnect the Internet, click Renew IP
Address.
To reconfigure the Internet settings, click Go to settings at the bottom-right.
D-Link COVR-1102 User Manual 12