D-Link COVR User Manual page 23

Section 3 - Configuration
Select Static IP if your IP information is provided by your Internet Service
Provider (ISP).
IP Address: Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask provided by your ISP.
Default Gateway: Enter the default gateway address provided by your ISP.
Primary DNS Enter the primary DNS server IP address assigned by your ISP.
Server:
Advanced Settings
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MAC Address The default MAC address is set to the physical interface MAC address
Clone: of port 1 on the master COVR Point. You can use the drop-down menu
to replace the Internet port's MAC address with the MAC address of
a connected client.
Click Save when you are done.
D-Link COVR-1102 User Manual
Static IP
19