Table of Contents
Advertisement
en Hob-based hood control
You now have two minutes to start the connection
6.
process on the extractor hood.
a Once the connection has been established,
up on the cooking zone display.
7.
Exit the basic settings.
a The hob's control panel shows the symbols for hob-
based hood control.
16.3 Resetting Home Connect settings
If you have problems connecting your appliance to the
WLAN home network (Wi-Fi) or if you want to log your
appliance onto a different WLAN home network (Wi-Fi) ,
you can reset the Home Connect settings.
Note: If you reset the Home Connect settings, the con-
nection to any extractor hood will also be terminated.
1.
Press and hold
for 4 seconds.
a The display will show the product information.
Touch
repeatedly until the display alternately
2.
shows
and .
Set the value
on the control panel.
3.
16.4 Controlling the extractor hood via the
hob
You can change the behaviour of your extractor hood
in the basic settings of your hob, depending on switch-
on/off of the hob or individual cooking zones.
You can select other settings using the controls on the
hob.
16.5 Overview of the hood control settings
In the basic settings for your hob, you can adjust the behaviour of your extractor hood depending on whether the hob
or individual cooking zones are switched on or off.
Setting
Selection
Connection between hob and extractor hood
– Not connected/disconnect
– Start connection process
– Connected to WLAN home network (Wi-Fi)
– Connected to extractor hood
Automatic fan start-up
– Switched off. The extractor hood must be
switched on manually, if required.
– Switched on in automatic mode
mode, the extractor hood switches itself on when
one of the cooking zones is switched on.
– Switched on in manual mode. The extractor
hood is switched on at a specified setting when a
cooking zone is switched on.
Fan run-on
– Fan switches off when the hob is switched off.
– Switched on in automatic mode
– Switched on with standard fan run-on
– No change to the settings
Switch light on automatically
– Switched off
– Switched on
The light switches itself on when the hob is
switched on.
Factory setting (may vary according to model)
1
18
lights
1
. In automatic
1
1
Setting the fan
Touch
.
1.
Select a fan setting on the control panel.
2.
You can choose between the levels 1, 2 and 3.
To select an intensive setting, touch 4 or 5 on the
control panel. Alternatively, you can repeatedly
touch
until the required intensive setting is dis-
played.
Switching off the fan
Select the fan setting 0 on the control panel.
▶
Switching on automatic mode
Press and hold
until the display shows .
▶
a The fan will start automatically when steam is pro-
duced.
Switching off automatic mode
Press and hold
until
▶
Automatic mode will also end if you select a differ-
ent fan setting.
Setting the hood lighting
You can switch the hood lighting on and off using the
control panel of the hob.
To switch the lighting on, touch
1.
To switch the lighting off, touch
2.
Description
-
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
Setting for whether and how the fan is to run on
after switching off the hob.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
goes out.
.
again.
Advertisement
Table of Contents
