Introduction; Description; Unpacking; Figure 1. Optional Perkinelmer Lite-Pacs And Accessories - PerkinElmer PS-1120 Operation Manual

A B C R D
1.0

INTRODUCTION

1.1

DESCRIPTION

The PS-1120 POWER SUPPLY is one of a series of Power Supplies designed
for high energy capacitor discharge service with any guided arc bulb-type
flashlamp and Lite-Pac® including those shown below.
FOR 1.5mm
METAL CAN
FLASHLAMP
FOR 3.0mm
METAL CAN
FLASHLAMP

Figure 1. Optional PerkinElmer Lite-Pacs and Accessories

The PS-1120 Power Supply performs two functions: (1) charges the flashlamp
discharge capacitor to a specific voltage at a specified rate, and (2) provides
trigger capacitor charging and switching functions at the required flash rate. Its
well regulated, low ripple characteristics ensure excellent discharge repeatability.
1.2

UNPACKING

If the condition of the outer packaging suggests mishandling has occurred,
examine the unit for any signs of breakage during shipment. If there are any
obvious signs of damage, contact the carrier immediately and do not proceed
with the installation. It is recommended that the packaging material be retained
and stored in the event that the unit has to be reshipped.
FF0091
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
PS-1120 POWER SUPPLY OPERATION MANUAL
LITE-PACS
FYD-1150
FYD-1150B
FYD-1151
FYD-1151B
2
ACCESSORIES
LITE PAC MOUNTING CLAMP
XP-0775
FLASHLAMP
CLAMP/SHIELD
XP-0777
LITE PAC MOUNTING CLAMP
XP-0775
FLASHLAMP
CLAMP/SHIELD
XP-0777
UM0024 Rev L