Connecting Peripherals; Starting Your Computer; Shutting Down Your Computer; Audio And Video Set Up Procedures - Acer AR3700-U3002 User Manual

Connecting peripherals

After everything is connected, plug the power cord into the system and
insert the other end into a power outlet.
Note: Don't connect the system power cord before connecting all
peripherals to the system.

Starting your computer

After connecting all the peripheral equipment, start your computer
according to the steps below:
1 Turn on all peripheral equipment, such as the monitor, printer,
fax, speakers, etc.
2 Turn on the system. Once the start up process is complete, you can
begin to use your computer.

Shutting down your computer

• Put the system to sleep mode by pressing the power button on the
keyboard.
• From the Start menu, select Shut Down and click OK.
Note: Please leave your computer on sleep mode rather than
turning it off.
In the event of a system crash, press and hold the power button on the
front of the system for four seconds. After the system has shut down,
turn off all peripheral devices.

Audio and Video Set up Procedures

Audio output device priority:
After finishing setting up your operating system, the audio output
priority will be as shown in the table below.
• USB speakers and HDMI devices can support hot-plugging.
Analog speakers will always be listed in the output device
priority list regardless of the presence or absence of the
7