Advertisement
Nokia Wifi Beacon | Safety and Regulatory Information
Legal
Terms of service, privacy policy and limited warranty for the
Nokia WiFi Beacon (a "Product") can be found at www.nokia.
com/wifi/legal/.
Safety Guidelines
ALWAYS READ THE NOKIA WIFI USER GUIDE BEFORE SET UP
OR USE OF THE PRODUCT. IT IS YOUR RESPONSIBILITY TO
FAMILIARIZE YOURSELF WITH THE PRODUCT REFERENCE
GUIDE, THE ONLINE USER GUIDE AND WARNINGS, AND TO
USE A PRODUCT PROPERLY. A COPY OF THE FULL USER GUIDE
CAN BE FOUND AT WWW.NOKIA.COM/WIFI/SUPPORT/
USER-GUIDE/.
Warning - Risk of electric shock or fire
Connect the Product power adaptor or cord to the right
supply voltage (for example, 120V AC in US, 230V in Australia
and New Zealand).
Pay attention to the power load of the electrical outlet and
possible extension cord. An overburdened power outlet or
damaged cords and plugs may cause electric shock or fire.
Check the power cords regularly. If you find any damage,
replace the cord immediately.
Do not connect the plug into an extension cord, receptacle, or
other outlet unless the plug can be fully inserted with no part
of the blades exposed.
Leave adequate space for heat dissipation to avoid any
damage caused by overheating the Product. Do not cover the
Product or its ventilation holes. Blocking the ventilation holes
may cause fire.
Use the power adapter provided with your Product and do not
fasten the power cable to building surfaces. Ensure the cable
can move freely. Do not place heavy objects on the cable.
Do not use the Product outside, and make sure all the
connections are indoors.
Do not install, use, or service this Product during a
thunderstorm. There is a remote risk of electric shock from
lightning.
The standby power consumption of the device is 4.9W.
Caution - Potential equipment damage
Follow these recommendations to protect yourself and the
Product from harm:
Do not insert any sharp object into the openings of a Product.
Do not put a Product near a heat source. Avoid placing the
Product in direct sunlight.
Do not put the Product in damp or wet locations; for example,
near a bathtub, washbowl, kitchen sink or laundry tub, in a wet
basement, or near a swimming pool. Do not spill any liquid
on the Product.
Do not touch the Product or its power adapter or cord with
wet hands.
Do not place the Product on an unstable surface or support.
Do not place heavy objects on top of the Products.
Do not use liquid or aerosol cleaners; unplug the Product and
use a soft, dry cloth for cleaning.
When connecting a PC or other electronic device to a Product,
make sure you use the right cables and connect the device
to the right port of the Product. Incorrect connections may
damage the device and/or the Product.
Do not open or try to open the Product. Opening or removing
covers can expose you to dangerous high voltage points or
other risks.
It is recommended that users and other individuals maintain
a distance of at least 32 cm between themselves and the
Product to avoid exposure. The Product contains components
that emit an electromagnetic field and could interfere with
pacemakers or other electronic medical devices. If you have a
pacemaker or other implantable or personal medical device,
please consult your physician or medical device manufacture
about the required minimum safe distance between the
Product and your medical device.
If the Product malfunctions or fails to perform as expected,
stop using it immediately.
The Products are for indoor and domestic use only.
ENVIRONMENTAL AND REGULATORY REQUIREMENTS
For Products Purchased in the United States
This device complies with part 15 of the U.S. FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
For product available in the USA/Canada market, only channel
1~11 can be operated. Selection of other channels is not
possible. This device is restricted for indoor use.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
No Unauthorized Modifications:
Do not make any changes or modifications to the Product
EN
Advertisement
