Removing And Replacing The Housing Cover; Removing The Housing Cover - Acer AcerPower 2000 Install Manual

4.2 Removing and Replacing the Housing
Cover
Before you proceed, make sure that you
have
peripherals connected to it.
4.1.2 for preinstallation instructions.
This section tells you how to open the housing cover when you need to install
additional components inside the system unit.
4.2.1

Removing the Housing Cover

1. Turn off power to the system unit and unplug all cables.
2. Place the system unit on a flat, steady surface.
3. Remove the three screws from the rear panel. Set the screws aside; you will
need them when replacing the housing cover.
Figure 4-2 Removing the Screws
4-4 AcerPower 2000 User's Guide
turned off the system and all
Read section