3.4 iTE IDE Controller Driver
This driver is used to enable the IDE controller after having installed the Windows operating
system to the hard disk connected between "IDE1" and "IDE2" connectors.
To install this driver:
1.
Click on the [Drivers] tab in the
installation menu screen.
2.
Click the [iTE IDE Controller Driver]
item. The installation screen appears.
3.
Follow the prompts on the screen to
complete installation.
3.5 USB 2.0 Driver
※
There is no need to install this driver for Windows 2000 with Service Pack 4,
Windows XP with Service Pack 1, or their later version.
IB9
3-3