AEG RDB424E1AW User Manual page 30

30 www.aeg.com
11. Tilt the appliance carefully on a soft
foam packaging or similar material to
avoid any damage to the back of the
appliance and the floor.
12. Remove both adjustable feet and
unscrew the screws of the lower
hinge.
13. Reverse the lower hinge to the other
side of the appliance, screw it with
screws and install adjustable feet.
14. Install the lower door by placing the
bottom door hole on the bottom
hinge pin. Tighten the screws.
15. Install the middle hinge to the left
side of the appliance by reversing its
original position.
16. Fit the upper hole of the lower door
on the middle hinge pin. Tighten the
screws.
17. Install the upper door by fitting the
lower hole of the door on the middle
hinge pin.
18. Put the upper hinge to the left top
side of the appliance. Supporting the
door with your hand put the hinge
pin into the upper hole of the upper
door. Tighten the screws of the
upper hinge.
19. Take out an upper hinge cover (A)
from a bag. Install it on the upper
hinge. Place the screw hole cover (B)
on the top right side of the appliance
where screw holes are.
A
Install the door equipment.
Wait at least 4 hours before connecting
the appliance to the power supply.
B