Napoleon Luxuria Series Installation Manual page 35

Before framing your appliance, determine vent requirements before deciding the final location of the appliance.
After rough framing, place the appliance in its final position.
single-sided
L
J
Ref LVX38
E* 18" (45.7cm)
F 53 13/16" (136.7cm)
J
L 73" (185.4cm)
see-thru
Ref LVX38
E* 16 3/16" (41.1cm)
F 53 13/16" (136.7cm)
J
L 73" (185.4cm)
rough framing - before appliance installation
E
F
LVX50
18" (45.7cm)
65 13/16" (167.2cm)
Optional - Appliance does not need to be elevated above floor
73" (185.4cm)
Before framing the appliance, ensure to install
the firestop first as it will not fit between the
studs if installed after framing.
L
E
F
J
LVX50
16 3/16" (41.1cm)
65 13/16" (167.2cm)
Optional - Appliance does not need to be elevated above floor
73" (185.4cm)
Before framing the appliance, ensure to install
the firestop first.
note:
The LVX series requires a
minimum enclosure height, as
illustrated (dimension L), mea-
sured from the bottom of the
appliance. For temperature
requirements, this area must be
left unobstructed. Some venting
configurations that require more
vertical rise will require a larger
enclosure to provide minimum
vertical clearance between vent
pipes and combustibles.
LVX62
18" (45.7cm)
77 13/16" (197.6cm)
91" (231.1cm)
*Maximum of 21" (53.5cm)
note:
The LVX series requires a minimum enclosure
height, as illustrated (dimension L), measured
from the bottom of the appliance. For tem-
perature requirements, this area must be left
unobstructed. Some venting configurations that
require more vertical rise will require a larger en-
closure to provide minimum vertical clearance
between vent pipes and combustibles.
LVX62
16 3/16" (41.1cm)
77 13/16" (197.6cm)
91" (231.1cm)
*Maximum of 21" (53.5cm)
EN
LVX74
18" (45.7cm)
89 13/16" (228.1cm)
91" (231.1cm)
LVX74
16 3/16" (41.1cm)
89 13/16" (228.1cm)
91" (231.1cm)
35
W415-1710 / B / 08.17.18