Table of Contents
Advertisement
Lenovo Moto G8 Plus
Level 2 – Service and Repair Manual
Thermal Gel Assembly Method B by area
1.
Use the 18-gauge needle (green color) for Artic
and Cooler Master.
Use the 14/15-gauge needle for Henkel LF350.
2.
Use the Tweezer to cut off the string of Thermal
gel from the needle.
NOTE
The tip of the needle and Tweezers must be
cleaned after each application.
3.
Heat conductive gel is extruded according to the
amount of heat conductive gel.
NOTE
Care not to exceed the diameter while applying
the Thermal gel.
Doha Thermal gel
area
A
B
C
PAGE 91
Diameter /mm
4
5
3
Lenovo Confidential Restricted:
Do not share without consent from Lenovo
Advertisement
Table of Contents
