Table of Contents
Advertisement
Lenovo Moto G8 Plus
Level 2 – Service and Repair Manual
5.
Use the 3 mm Allen Wrench on the two center
screws to tighten the Display/Battery Inlay
Removal Insert into position.
6.
Slide both side rails on the Display Removal
Fixture firmly against the Battery Inlay Insert.
Use the 3 mm Allen Wrench to tighten the four
outside screws on the underside of the Display
Removal Fixture.
7.
Follow preheating steps described on Page 17.
8.
Slide the phone into the Battery Removal
Fixture as shown. Center the phone in the
Fixture.
9.
Use an alignment pin to lock the phone and the
Battery Inlay Removal Insert as shown.
PAGE 22
Lenovo Confidential Restricted:
Do not share without consent from Lenovo
Advertisement
Table of Contents
