Lenovo Moto G8 Plus Service And Repair Manual page 27

Lenovo Moto G8 Plus
Level 2 – Service and Repair Manual
4. Move the Thin Plastic Spudger from the bottom
right corner in the directions as shown.
//CAUTION//
The highlighted frame on the left-hand side is a
weak area. Do not disassemble at this location.
5. Split the Battery Inlay from the phone.
/// WARNING ///
Use care not to disconnect the Fingerprint
Sensor (FPS) Flex from the Battery Inlay Cover
when removing the Front Housing.
6. Use the pointed end of the Black Stick to push
out the Finger Print Sensor Flex from the Battery
Inlay as shown.
PAGE 27
Lenovo Confidential Restricted:
Do not share without consent from Lenovo