Safety Message - Rato RTAXQ1-190 Owner's Manual

SAFETY PRECAUTIONS
I. SAFETY MESSAGE
Read and understand this owner's manual and acquaint the welder's safe
operating procedures before operating your welder. That can help you
avoid accidents.
1. Keep the welder far away from the inflammable and explosive
material in operating.
2. Don't operate the welder in the closed area or in the poor ventilated
places in order to avoid carbon monoxide poisoning!
3. Do not touch the high voltage power supply in using it.
4. The muffler and engine are very hot during running the welder.
Never touch them, or you may get burns.
5. Stop the engine and keep the fire source far away when refueling.
6. Don't cover the welder with objects and left around at least 1 meter
distance in order to facilitate the cooling unit.
7. Pay attention to the safety while operate welder in the rainy and
snowy days. Do not touch motor and distribution lines with wet
hands in order to avoid an electric shock accident.
8. Cooling air temperature does not exceed 45 ℃ .
9. Air relative humidity is not more than 80%;
10. Use welder in the absence of conductive dust and corrosive gases.
11. The environmental temperature change will affect the action of
circuit breaker. Please replace the circuit breaker which is suitable to
the local temperature.
· 4 ·