Rato RTAXQ1-190 Owner's Manual page 15

3. Auxiliary Power Supply
1.This series welder is with auxiliary DC output. The voltage is 220V,
which can be used for the electrical tools below 3KW with carbon brush.
2.This series welder is with auxiliary AC output. The voltage is 230V,
which can be used for the electrical tools below 3.5KW with carbon
brush.
• Don't connect to household electrical appliance directly.
• Don't use the auxiliary power supply at one time when welding.
GROUND TERMINAL
AC RECEPTACLE
WELDER OPERATION
· 13 ·