Table of Contents
Advertisement
MAINTENANCE
environment. We suggest you take it in a sealed container to your local
service station or recycling center for reclamation. Do not throw it in the
garbage or dump it on the ground and in the raceway.
2. Air Cleaner Service
A dirty air cleaner will restrict air flow to the carburetor. To prevent
carburetor malfunction, service the air cleaner regularly. Service more
frequently when operating the welder in extremely dusty areas.
Using gasoline or flammable solvent to clean the filter element can
cause a fire or explosion. Use only soapy water or nonflammable
solvent.
Never run the welder without the air cleaner, or engine will wear
rapidly.
1) Remove the air cleaner connection bolt and open the air cover. Check
the air cleaner element to insure complete cleanness.
2) If the air cleaner element is dirt, please clean the air cleaner element:
Wash the air cleaner element in warm water with household detergent,
or wash in nonflammable or high flash point solvent, then rinse
thoroughly and squeeze it. Drop a few points engine oil in, then,
squeeze evenly.
· 22 ·
Advertisement
Table of Contents
