Caring For Your Steam Pocket Mop; Ordering Additional Accessories - Shark Klik N' Flip S6001UK Owner's Manual

Caring for Your Steam Pocket
®
fig. 12
fig. 13
AFTER USE AND STORAGE
1 Unplug the cord from the outlet and place the Steam
Mop into the upright position. Let it cool.
2 To remove the Dirt Grip pad, lift the Steam Mop straight
™
up by the handle until the Genius Mop Head is hanging
™
straight down. Press the Release button on the back of
the Steam Mop body, and both sides of the Genius Mop
Head will drop open, releasing the pad. Once the pad
has been released, close the Genius Mop Head.
3 If the Genius Mop Head is not attached to the Steam
Mop, the pad can still be removed. Press the two red
secondary pad release buttons located on the sides of the
Genius Mop Head post to release the pad (fig. 12).
4
Empty the water tank before storing. To empty the
tank, hold the Steam Mop beside a sink. Open the
water tank lid, then lean the unit over the sink. Let
the water drain out, then close the lid.
5
To store the Steam Mop, wait until after it has cooled
and the steam has been released. Then remove the
Genius Mop Head and hang the Steam Mop by its
handle on a large hook (not included) (fig. 13).
6
Store the filling flask by attaching it to the top handle
pole of the Steam Mop.
9 0800 862 0453
Mop
fig. 14
fig. 15
DIRT GRIP PAD CARE INSTRUCTIONS
Care
Machine-wash the Dirt Grip pads separately with warm
water using liquid detergent.
NEVER USE BLEACH, POWDERED DETERGENT, OR
FABRIC SOFTENERS as they may damage or leave
a coating on the Dirt Grip pads that will reduce their
cleaning performance and absorbency. Dirt Grip pads
should be line-dried or tumble-dried on a low setting, as
this will extend the life of the microfiber fabric (fig. 14).
Loose fibers can indicate wearing of the microfiber
fabric. Do not pull the loose fibers, as this can cause the
weave to come undone. Simply trim the loose fibers with
scissors (fig. 15).
Replacement Dirt Grip pads
For best cleaning results, we recommend replacing your
Dirt Grip pads every 3 to 4 months following normal use.
As with any fabric, dirt particles, grease, friction, and
repeated washing can cause the fibers to break down, and
you may notice an increase in the effort needed to push or
pull the Steam Mop.
You can purchase replacement Dirt Grip pads and
other accessories by visiting sharkclean.eu or calling
0800 862 0453.
STEAM NOZZLE CARE
If you believe the main steam nozzle or the Steam Blaster
nozzle is clogged, please contact Customer Service at
0800 862 0453 or www.sharkclean.eu/uk

Ordering Additional Accessories

ACCESSORY
Genius Mop Head
™
Great for all-purpose cleaning. Get an extra boost for tough stains from the Steam
Blaster ™ , and cut your cleaning time in half with the hands-free two-sided pad.
Dirt Grip Pad
™
Double-sided pad. Easy, hands-free installation and removal. Washable and
reusable.
Triangle Scrubber Head
Triangle shape is perfect for cleaning corners and hard-to-reach areas.
Equipped with a Steam Blaster to help loosen stains and a deployable
scrubber to tackle stuck-on spots.
Triangle Scrubber Pad
Ideal for cleaning corners and other hard-to-reach spaces. Easy to install
and remove.
Spray bottle and clip
Add the cleaner of your choice to the spray bottle. The clip keeps it handy,
right where you need it while you clean. When refilling the bottle with a
different cleaner, make sure to first review the warnings, usage and storage
instructions for that cleaner before doing so.
Filling Flask
Filling line makes it simple and convenient to fill the water tank. Flask
attaches to the handle for easy storage.
™
sharkclean.eu 10