Table of Contents
Advertisement
Windows Client Control Panel
The control panel consists of an icon bar at the top, with two text bars below it.
Initially, the text bars display the video resolution and IP address of the device
at the remote location. As the mouse pointer moves over the icons in the icon
bar, however, the text bar information changes to describe the icon's function.
The functions that the icons perform are described in the table below.
Icon
Drag the OSD display to another position on the screen by clicking
and holding on the hand while you move the mouse.
Click to bring up the Hotkey Setup dialog box (see p. 38 for details).
Click to bring up the Video Adjustment dialog box. Right click to do a
fast Auto Sync (see p. 40 for details).
Click to enable Panel Array Mode (see p. 43 for details).
Click to exit the Windows Client control of the remote unit.
(Space)
Hover over the space to see the video resolution and IP address of
the device at the remote location.
These LEDs show the Num Lock, Caps Lock, and Scroll Lock status
of the remote computer. Click on the icon to toggle the status.
Note: When you first connect, the LED display may not be accurate.
To be sure, click on the LEDs to set them.
The Hotkey Setup, Video Adjustment, and Panel Array functions are discussed
in the sections that follow.
Function
2004-11-23
37
Advertisement
Table of Contents
