Beurer BC 51 Instructions For Use Manual page 44

on the display after the measurement, the measurement must be repeated as the measurement
accuracy may be impaired. To assess your blood pressure, only use the results that have been
recorded without corresponding irregularities in your pulse. If the
please consult your doctor. Only they can establish the existence of an arrhythmia during a checkup,
using their means of diagnosis.
Saving, accessing and deleting measured values
The results of every successful measurement are stored together with the date and time. The
oldest measurement is overwritten in the event of more than 120 measurements.
• To select the relevant user memory, press the memory button M1 (for user ) or M2 (for user
memory ) when the device is switched off. Then confirm your selection by pressing the
START/STOP button
A A flashes on the display.
The average value of all saved measured values in this user memory is displayed.
• Press the memory button M1.
AM AM flashes on the display.
The average value of the morning measurements for the last 7 days is displayed
(morning: 5 a.m. – 9 a.m.).
• Press the memory button M1.
PM PM flashes on the display.
The average value of the evening measurements for the last 7 days is displayed
(evening: 6 p.m. – 8 p.m.).
.
44
symbol appears frequently,