Ness Security Products IS100 Quick Setup Manual page 9

12.
Under the 'Add this website to the zone:' type in the IP address, using the http://
prefix.
NOTE : You will need to un-tick "Require server verification (https) for all sites in this zone"
13.
Click
14.
The controller address will now appear under Websites.
Once these settings are complete, continue on to the IS100 system set-up.
NOTE : The following is a quick set-up guide only.
A full copy of the User's Manual can be downloaded from
http://www.ness.com.au/UserManual/Ness_IS100_User_Manual_V1.0.pdf
07/07|V1.0 890-377
.
2007-2010© Ness Security Products. All rights reserved.
IS100 Quick Set-Up Guide
9