Ness Security Products IS100 Quick Setup Manual page 6

3.
Click on the Hardware Manager module.
4.
In the Network Configuration dialog box, change the controller's IP Address to suit the customer
network. Click
07/07|V1.0 890-377 2007-2010© Ness Security Products. All rights reserved.
IS100 Quick Set-Up Guide
Enter the IP Address to suit the
customers network. (you may need to
get this IP Address from the
customers system administrator)
Enter the Subnet mask (normally
255.255.255.0)
Enter the default Gateway if this
controller is to connect to Internet.
6