Ness Security Products IS100 Quick Setup Manual page 11

!
Exercise caution when performing the Restore Data function. Restoring the database will
OVERWRITE the existing database on the controller.
Logon Password
1.
Before performing the
system set-up, change the
logon password. Click on
the controller from the
Hardware System Tree.
2.
Under the Controller
Information window, go to
Admin Password.
3.
Under the Admin Password,
click on .
Set-up
When a new system is installed, go to Hardware Manager.
•
Perform an auto scan with the controller to scan the network for all sub-controllers that are in
•
communication with the controller. Right mouse-click on the controller and select
for Sub-Controllers'.
Once auto scan is complete, the hardware will automatically populate the Hardware System
•
Tree.
To modify any of the settings, simply click on the hardware or device from the Hardware
•
System Tree to display corresponding properties and values in the Hardware Information
window. Usually, the default settings are sufficient.
07/07|V1.0 890-377
4.
Enter a 20 character alpha numeric password.
Passwords are CASE SENSITIVE.
5.
Click to acknowledge and close the window.
2007-2010© Ness Security Products. All rights reserved.
IS100 Quick Set-Up Guide
'Autoscan
11