Ness Security Products IS100 Quick Setup Manual page 7

5.
Once modified to the existing network settings, the communication between the controller and the
computer will be lost.
6.
Restore the computer network configuration back to ,match the controllers IP range.
7.
Once the steps above are complete, go to the Internet Explorer browser, and enter the
controller's newly configured IP address:
NOTE : If you have changed
the default password when
changing the IP address you
will need to enter the new
password now to log into the
controller. .
07/07|V1.0 890-377
http://xxx.xxx.x.xx/
2007-2010© Ness Security Products. All rights reserved.
IS100 Quick Set-Up Guide
to launch IS100.
7