Advertisement
Flex Link Serial Cable
Quick Start
Global Caché
is lessening our carbon
footprint by reducing our paper
output. For complete documentation
and tutorials, visit:
www.globalcache.com/docs
Getting Started.
Once the iTach Flex is
connected to the network by either an Eth-
ernet cable or WiFi, plug the Flex Link
RS232 or RS485 Serial cable into the Flex
Link Port.
To configure Serial cable functionality, right
click on the unit entry in iHelp* and select
Configure. To access the set up pages manu-
ally, type in the unit's IP address. A web
browser will display the configuration pages.
On the Flex Link Cable page, select Serial
in the dropdown menu to configure the set-
tings as desired.
Flex Link 485 Serial Cable.
The RS485
setting includes Baud Rate, Duplex, Parity,
Data Bits, and Stop Bits. Duplex is unique
to RS485 cables . It should be set to Full for
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Global Cache Flex Link Serial Cable
Summary of Contents for Global Cache Flex Link Serial Cable
- Page 1 Flex Link Serial Cable Quick Start Global Caché is lessening our carbon footprint by reducing our paper output. For complete documentation and tutorials, visit: www.globalcache.com/docs Getting Started. Once the iTach Flex is connected to the network by either an Eth-...
- Page 2 The RS232 set- ting includes Baud Rate, Flow Control, Parity, Data Bits, Stop Bits, and Gender. The gender of a Flex Link Serial cable can be changed using the included gender changer. The setting should be set to True if the gender changer is used or False if it is not used.
Need help?
Do you have a question about the Flex Link Serial Cable and is the answer not in the manual?
Questions and answers