Mazda CX-9 2019 Owner's Manual page 682

Specifications
Personalization Features
Item
Active driving display (page 4-56)
Setting can be changed so that the Active Driv‐
ing Display is not displayed.
The display height (up/down position) can be
changed.
The method for adjusting the display bright‐
ness (automatically/manually) can be changed.
The standard brightness with the automatic
Display
brightness adjustment can be changed.
The standard brightness with the manual
brightness adjustment can be changed.
The display angle can be changed.
Navigation guid‐
Display/non-display
ance
*
1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda
recommends that these systems remain On.
*
2 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.
*
3 This system functions only when the navigation system is functioning.
*
4 When the ultrasonic sensors detect an obstruction, the contents indicated on the center display switches to the
360°View Monitor. (Vehicles with 360°View Monitor)
*
5 If the auto-wiper control is set to Off, the wiper lever
*
6 If the setting is changed to Off, the following operation is performed according to the headlight switch
position:
At position: Headlights turn off immediately after the ignition is switched off.

At any position other than

position. Refer to Headlights on page 4-68.
*
7 When set to 0 seconds, the lights-on reminder is operable.
*
8 The lights-on reminder settings can be changed at anytime, however, the lights-on reminder only operates
when the auto headlight function is set to Off. Refer to Lights-On Reminder on page 7-46.
*
9 Change the ambient light illumination level with the parking lights or headlights turned on.
*
10 When set to OFF, the ambient lights remain turned off regardless of whether or not the parking lights or
headlights are on or off. However, they will turn on or off in conjunction with the illuminated entry system.
9-16
Feature
: Headlights on/off conditions vary according to the headlight switch
Factory Set‐ Available Set‐
ting
On On/Off
13 steps up/
down from ini‐
0
tial setting (total:
27 steps)
Auto Auto/Man.
2 steps up/down
from initial set‐
0
ting (total: 5
20 steps up/
down from ini‐
0
tial setting (total:
41 steps)
3steps up/down
from initial set‐
0
ting (total:
7steps)
On On/Off
position is set to intermittent operation.
Settings
Change
Method
tings
C ―
C ―
C ―
C ―
steps)
C ―
C ―
C ―