Mazda CX-9 2019 Owner's Manual page 113

Auto lock/unlock function setting
change using door-lock switch
The doors and the liftgate can be set to
lock or unlock automatically by selecting
any one of the functions from the
following table and using the driver's
door-lock switch on the interior door
panel.
NOTE
Function number 3 in the following

table is the factory setting for your
vehicle.
There are only a total of six auto lock/

unlock settings available. Be sure to
press the unlock side of the driver's
door-lock switch the correct number of
times according to the selected function
number. If the switch is mistakenly
pressed seven times, the procedure will
be cancelled. If this occurs, start the
procedure from the beginning.
Function
number
The auto door-lock function is disa‐
1
bled.
All the doors and the liftgate lock au‐
2 tomatically when the vehicle speed is
about 20 km/h (12 mph) or more.
All the doors and the liftgate lock au‐
tomatically when the vehicle speed is
3 (Factory about 20 km/h (12 mph) or more. All
Setting) the doors and the liftgate unlock
when the ignition is switched from
ON to Off.
When the ignition is switched ON
and the selector lever is shifted from
4 park (P) to any other gear position, all
the doors and the liftgate lock auto‐
matically.
*1
Function
Doors and Locks
Function
number
When the ignition is switched ON
and the selector lever is shifted from
park (P) to any other gear position, all
the doors and the liftgate lock auto‐
5 matically.
When the selector lever is shifted to
park (P) while the ignition is switched
ON, all the doors and the liftgate un‐
lock automatically.
All the doors and the liftgate lock au‐
tomatically when the vehicle speed is
about 20 km/h (12 mph) or more.
6 When the selector lever is shifted to
park (P) while the ignition is switched
ON, all the doors and the liftgate un‐
lock automatically.
*
1 Other settings for the auto door lock function are
available at an Authorized Mazda Dealer. For
details consult an Authorized Mazda Dealer.
Refer to Personalization Features on page 9-10.
Settings can be changed using the
following procedure.
1. Safely park the vehicle. All doors and
the liftgate must remain closed.
2. Switch the ignition ON.
3. Press and hold the lock side of the
driver's door-lock switch within 20
seconds of switching the ignition ON,
and make sure a beep sound is heard
about eight seconds afterwards.
4. Refer to the auto lock/unlock function
setting table, determine the function
number for the desired setting. Press
the unlock side of the driver's
door-lock switch the same number of
times as the selected function number
(Ex. If you select function 2, press the
unlock side of the switch only 2 times).
Before Driving
*1
Function
3-17