Mazda CX-9 2019 Owner's Manual page 299

Another vehicle cuts into the driving lane.

▼ Setting the System
The MRCC with Stop & Go function system operates when all of the following conditions
are met.
Vehicle speed is 0 km/h (0 mph) to 145 km/h (90 mph)

The MRCC with Stop & Go function is turned on.

The brake pedal is not depressed.

The parking brake is released (Electric Parking Brake (EPB) indicator light is turned off).

There is no problem with the DSC.

All the doors are closed.

The driver's seat belt is fastened.

The selector lever is in the drive (D) position or manual (M) position (manual mode).

NOTE
In the following cases, the MRCC with Stop & Go function system is canceled when the

vehicle is traveling at 30 km/h (20 mph) or less and "Mazda Radar Cruise Control
disabled under 30 km/h (20 mph)" is displayed in the multi-information display.
The Forward Sensing Camera (FSC) cannot detect target objects (There is problem

with the Forward Sensing Camera (FSC) or windshield is dirty).
There is a problem with the stop hold control function.

There is a problem with the Electric Parking Brake (EPB).

It may not be possible to set the MRCC with Stop & Go function system directly after

starting the engine, while the DSC operation is being checked.
Turning on the system
switch
switch
MODE switch
When Driving
i-ACTIVSENSE
SET+ switch
RES switch
SET- switch
CANCEL switch
OFF switch
4-139