Mazda CX-9 2019 Owner's Manual page 367

▼ To Set Speed
1. Activate the cruise control system by
pressing the ON switch. The cruise
main indication (white) is displayed.
2. Accelerate to the desired speed, which
must be more than 25 km/h (16 mph).
3. Set the cruise control by pressing the
SET/ switch at the desired speed. The
cruise control is set at the moment the
SET/ switch is pressed. Release the
accelerator pedal simultaneously. The
cruise set indication (green) is
displayed.
NOTE
The cruise control speed setting cannot

be performed under the following
conditions:
The selector lever is in the P or N

position.
The parking brake is applied.

Release the SET/ or RES/ switch at

the desired speed, otherwise the speed
will continue increasing while the RES/
switch is pressed and held, and
continue decreasing while the SET/
switch is pressed and held (except when
the accelerator pedal is depressed).
On a steep grade, the vehicle may

momentarily slow down while
ascending, or speed up while
descending.
The cruise control will cancel if the

vehicle speed decreases below 21 km/h
(13 mph) when climbing a steep grade.
The cruise control may cancel at about

15 km/h (9 mph) below the preset speed
such as when climbing a long, steep
grade.
The vehicle speed preset using the cruise
control is displayed in the instrument
cluster.
Instrument Cluster
Type A
*1
*1: Needle indicates set speed.
Type B
Active Driving Display
When Driving
Cruise Control
Type C
4-207