Preparations For Installation; Standard Fittings - Gree GMV-ND22TD/A-T Owner's Manual

3 Preparations for Installation

Note: This picture is for reference only, please refer to the actual product, the unit of
dimension is mm.

3.1 Standard Fittings

Use the following provided accessories according to the requirement.
No. Name
1 wireless controller
paper pattern for
2
installation
Tapping screw with
3
washer
4 Washer fixing plate
5 Drain Hose Assembly
6 Special Nut
7 M10X8 Nut with Washer
8 M10 Nut (M10X8.4 Nut)
M10 Washer (Spring
9
Washer M10X2.6)
10 Insulation
11 Insulation
12 Sponge
13 Fastener
Multi Variable Air Conditioners One-way Cassette Type Indoor Unit
Appearance Q'ty
1 To control the indoor unit
1 Locate the drill hole on ceiling
4 Fix paper pattern
4 Prevent the washer from falling off
To connect with the hard PVC
1
drain pipe
To be used for connecting the
1
refrigerant pipe
To be used together with the
4
hanger bolt for installing the unit.
To be used together with the
4
hanger bolt for installing the unit.
To be used together with the
4
hanger bolt for installing the unit.
1 To insulate the gas pipe
1 To insulate the liquid pipe
1 To insulate the drain pipe
4 To fasten the sponge
4
Usage