Multi Variable Air Conditioners One-way Cassette Type Indoor Unit
4) Use the screwdriver for tightening the terminal.
5.2 Power Cord Connection
Note:
① Every unit should be equipped with a circuit breaker for short-circuit and overload protection.
② During operation, all indoor units connected to the same outdoor unit system must be kept
energized status. Otherwise, the unit can't operate normally.
For units with single-phase power supply.
1) Detach the electric box lid.
2) Let the power cord pass through the wiring through-holes.
3) Connect the power cord to terminal "L, N, "
4) Fix the power card with wiring clamp.
5.3 Connection of Communication Wire between Indoor Unit and Outdoor
Unit (or indoor unit)
(1) Detach the electric box lid.
(2) Let the Communication cable pass through the wiring through-holes.
Fig 5.1.1
Fig 5.1.2
Fig 5.2
15