Connecting The Power Cord - Shimano Steps E6000 Series Dealer's Manual

Installing and wiring the drive unit

Connecting the power cord

„ Connecting the power cord
Connecting to the drive unit
Align the arrow on the power cord connector
(A) with the triangle symbol on the drive unit
receptacle (B) and insert the power cord.
Insert it until it locks into place.
Disconnecting from the drive unit
To remove the power cord, hold it by the
grooved part of its end and pull it towards
yourself.
(A)
22
(A)
Power cord connector
(B)
Drive unit receptacle
(B)