Framery O Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Framery Manuals
  4. Cordless Telephone
  5. O
  6. Installation instructions manual

Framery O Installation Instructions Manual

Hide thumbs Also See for Framery O:
Table of Contents

Advertisement

Quick Links

Framery O
English
Installation instructions
Version 2.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Framery O and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Framery Framery O

Summary of Contents for Framery Framery O

  • Page 1 Framery O English Installation instructions Version 2.0...

  • Page 3: Table Of Contents

    Contents 1 Warranty checklist..................5 2 Important safety and product instructions..........6 2.1 Preface........................6 2.2 Product information....................6 2.3 Copyright.........................6 2.4 Manual contents..................... 6 2.5 Intended use......................6 2.5.1 Non-conventional use.................6 2.5.2 Ambient conditions for use.................7 2.6 Warning, information and safety symbols in this manual........7 2.7 Main safety risks related to the installation, maintenance, disassembly and use of the product......................
  • Page 4 10 Install the door..................43 10.1 Install the door with frames................43 10.2 Install the door handle..................47 10.3 Program the master code into the code handle (optional)......... 50 10.4 Install the code handle (optional)............... 51 11 Install the glass wall................53 11.1 Install the floor cover panels................55 12 Install the interior..................

  • Page 5: Warranty Checklist

    For the product warranty to be valid: Fill this checklist and send it to Framery after pod installation. Take a photo or scan the filled list and send it to Framery at warranty@frameryacoustics.com. Leave the completed list on the pod's glass door.

  • Page 6: Important Safety And Product Instructions

    • Installation instructions 2.5 Intended use The Framery OO VCR is a pod intended for short term indoor commercial and household use by one (1) person at a time. Warning: WARNING –To reduce the risk of burns, fire, electric shock, or injury to persons: Use this product only for its intended use as described in the user instructions.

  • Page 7: Ambient Conditions For Use

    A white symbol inside a colored circle indicates an action that must be taken to avoid a hazardous situation. Table 3: Prohibited action A ring with a diagonal bar indicates an action that is not allowed. Framery O Installation instructions info@frameryacoustics.com...

  • Page 8: Main Safety Risks Related To The Installation, Maintenance, Disassembly And Use Of The Product

    2.7.2 Electrical safety Input for the electrical system: 100-240 VAC (10 A) 50-60 Hz The maximum load for the electrical system is 6.6 A. Framery O Installation instructions info@frameryacoustics.com...

  • Page 9: Fire Safety

    Do not connect any extension cords to the power outlet(s) of the product. 2.7.3 Fire safety The fire load for the Framery OO VCR is approx. 3200 MJ. WARNING! To reduce the risk of burns, fire, electric shock, or injury to persons, obey...

  • Page 10: Use

    Do not drop or insert any object into any opening if not specifically instructed to do so in this manual. Do not use outdoors. Do not use where aerosol (spray) products are being used or where oxygen is being administered. Framery O Installation instructions info@frameryacoustics.com...

  • Page 11: Location Of Product Markings

    Do not climb on top of the product or place any load on the roof of the product. Do not lean against the product. Do not smoke inside the product. 2.8 Location of Product Markings Framery O Installation instructions info@frameryacoustics.com...
  • Page 12 Position Label Label text Framery This furnishing has not been evaluated for flammability or cigarette ignition resistance L'inflammabilité ou la résistance à l'allumage d'une cigarette n'a pas été évaluée pour cette garniture Framery O Installation instructions info@frameryacoustics.com...
  • Page 13 Position Label Label text Framery PRODUCT NO. / N° DE PRODUIT Product / Produit FRAMERY O FRAMERY O VCR Input / Entrée 100-240VAC 10A 50-60HZ Manufacturer / Fabricant: Framery Oy WEB: www.frameryacoustics.com Email: info@frameryacoustics.com Made in Finland/ Fabriqué en Finlande...
  • Page 14 139 lbs / 63 kg Position Label Label text Framery This furnishing has not been evaluated for flammability or cigarette ignition resistance L'inflammabilité ou la résistance à l'allumage d'une cigarette n'a pas été évaluée pour cette garniture Framery O Installation instructions info@frameryacoustics.com...
  • Page 15 Position Label Label text Framery PRODUCT NO. / N° DE PRODUIT Product / Produit FRAMERY O FRAMERY O VCR Input / Entrée 100-240VAC 10 A 50-60HZ Manufacturer / Fabricant: Framery Oy WEB: www.frameryacoustics.com Email: info@frameryacoustics.com Made in Finland/ Fabriqué en Finlande...
  • Page 16 L'AVERTISSEMENT Risque de blessure Poids maximal autorisé 139 lbs / 63 kg Framery WARNING Risk of injury Maximum load 22 lbs / 10 L'AVERTISSEMENT Risque de blessure Poids maximal autorisé 22 lbs / 10 kg SAVE THESE INSTRUCTIONS Framery O Installation instructions info@frameryacoustics.com...

  • Page 17: Installation Requirements

    Figure 1: Tools and accessories needed for installation and maintenance Note: Use a white rubber mallet to prevent marks on the body covers. Note: Use a plastic chisel to remove the body covers. Note: Use a lint-free cloth to clean the pod. Framery O Installation instructions info@frameryacoustics.com...

  • Page 18: Main Dimensions

    Note: Use a mild alcohol-based cleaning solution to clean the pod. 3.2 Main dimensions Figure 2: Main dimensions 3.3 Installation space Make sure that you have enough installation space before you start the installation. Figure 3: Installation space measures Figure 4: Installation space measures Framery O Installation instructions info@frameryacoustics.com...

  • Page 19: Operating Space

    3.4 Operating space Make sure that the pod has enough space for the air to circulate correctly. Figure 5: Operating space measurements Figure 6: Operating space measurements Figure 7: Operating space measurements Framery O Installation instructions info@frameryacoustics.com...

  • Page 20: Level The Floor Module

    Note: The stool mounting notch is closer to the backside of the pod. Screw out the feet of the leveling screws (4 pcs) gradually with a T-handle socket wrench. The feet of the leveling screws are against the floor when you feel resistance. Framery O Installation instructions info@frameryacoustics.com...
  • Page 21 • On top of the walls on the right and left sides • On the ABS strips at the edges of the floor modules Measure opposite points repeatedly and adjust the feet of the leveling screws gradually. Framery O Installation instructions info@frameryacoustics.com...

  • Page 22: Install The Wall Modules

    Place the wall modules lengthwise against a wall. Unscrew the 4x30 screws (8 pcs) and remove the cover panels (4 pcs). Set the cover panels and screws aside. Note: Make sure that the wall modules do not fall over. Framery O Installation instructions info@frameryacoustics.com...
  • Page 23 Unscrew the 4x30 screws (24 pcs) and remove the cover panels (4 pcs). Set the cover panels and screws aside. Framery O Installation instructions info@frameryacoustics.com...

  • Page 24: Connect The Wall Modules To The Floor Module

    Note: Make sure that the front of the floor module is against the floor. Note: Make sure that the feet of the leveling screws are past the floor board level. Note: Make sure that the feet of the leveling screws are past the wheels. Framery O Installation instructions info@frameryacoustics.com...
  • Page 25 Note: Make sure that you install the techwall module on the correct side of the floor module. The power cord and the electrical channel are on the same side. Framery O Installation instructions info@frameryacoustics.com...
  • Page 26 Note: Make sure that you install the blank wall module on the correct side of the floor module. The electrical channel is on the other side of the floor module. Framery O Installation instructions info@frameryacoustics.com...
  • Page 27 Install M8x35 bolts (3 pcs) and M8 washers (3 pcs). Framery O Installation instructions info@frameryacoustics.com...

  • Page 28: Connect The Roof Module To The Wall Modules

    Push the roof module carefully into place. Note: Make sure that the roof module cord is in the wire channel. Make sure that the wall module cord is not between the modules. Framery O Installation instructions info@frameryacoustics.com...
  • Page 29 Install M8x35 bolts (3 pcs on each side) and M8 washers (3 pcs on each side). Connect the cords. Note: Make sure that the roof module cord is in the wire channel. Framery O Installation instructions info@frameryacoustics.com...

  • Page 30: Remove The Roof Cover Panels

    7 Remove the roof cover panels Unscrew the 4x30 screws (4 pcs) and remove the roof cover panels (2 pcs). Set the cover panels and screws aside. Framery O Installation instructions info@frameryacoustics.com...

  • Page 31: Check The Straightness Of The Pod

    Warning: Heavy object, risk of injury. Make sure that the weight of the pod is supported entirely by the feet of the leveling screws. Do not leave weight on the wheels. Note: Do not lift the pod from the roof module. Framery O Installation instructions info@frameryacoustics.com...
  • Page 32 • Slightly above the floor and wall module junction on both sides • Slightly below the roof and wall module junction on both sides • On the edge of the floor module (on the ABS strips) on both sides Framery O Installation instructions info@frameryacoustics.com...
  • Page 33 If the module is tilted, adjust the feet of the leveling screws of the floor module. Note: Measure opposite points repeatedly and adjust the feet of the leveling screws gradually. Framery O Installation instructions info@frameryacoustics.com...

  • Page 34: Install The Table And Electrics

    Make sure that the serial number on the sticker on the bottom board of the table matches the serial number on the warranty checklist. Figure 8: Serial number on the standard table Figure 9: Serial number on the wide table Framery O Installation instructions info@frameryacoustics.com...

  • Page 35: Mount The Table To The Wall

    9.2 Mount the table to the wall Remove 4x30 screws (2 pcs) from the standard table bottom board. The wide table bottom board has countersunk M6x25 screws (2 pcs). Use a hex key. Framery O Installation instructions info@frameryacoustics.com...

  • Page 36: Install The Electrical Connections

    9.3 Install the electrical connections If you want to install the power cord to the floor module, go to step 3. If you want to install the power cord to the roof module, go to step 1. Framery O Installation instructions info@frameryacoustics.com...
  • Page 37 Pull the AC extension cord out from the floor and wall module junction. Feed the male socket end of the AC extension cord in through the opening at the top of the wall module and out from under the table. Use a draw wire if needed. Framery O Installation instructions info@frameryacoustics.com...
  • Page 38 Pull the light and fan cord out of the wall into the table. Note: Check that the power outlet AC cord is connected to the power unit. Note: Check that the motion detector DC cord is connected to the motion detector. Framery O Installation instructions info@frameryacoustics.com...
  • Page 39 Make sure that the ON/OFF switch of the power unit is in the "I" position. If the option includes the wireless charger, check that the wireless charger cord is connected to the USB connector. Framery O Installation instructions info@frameryacoustics.com...
  • Page 40 Connect the AC extension cord to the AC connector of the power unit. Tip: The power unit AC connector has a locking mechanism. To bypass the locking mechanism, tilt the connector of the AC extension cord first down and then up. Framery O Installation instructions info@frameryacoustics.com...
  • Page 41 Note: Check that the motion detector cord is connected to the PIR connector of the control unit and that the DC input cord is connected to the POWER IN connector of the control unit. Connect the light cord to the LED 1 connector of the control unit. Framery O Installation instructions info@frameryacoustics.com...
  • Page 42 Fasten the table bottom board with 4x30 screws (2 pcs). The wide table bottom board has countersunk M6x25 screws (2 pcs). Use a hex key. Note: Make sure that the cords are not between the table boards. Framery O Installation instructions info@frameryacoustics.com...

  • Page 43: Install The Door

    Install the guide pins (4 pcs) to the mounting holes of the wall module. Note: Make sure that the flat side of the guide pin goes into the mounting hole. Framery O Installation instructions info@frameryacoustics.com...
  • Page 44 Kneel on the floor and lift the door frame with door approx. 10 mm (½ in) to fit it into place. Warning: Heavy object, risk of injury! Lifting requires 2 people. Warning: Do not crush your fingers between the door frame and the wall module or floor. Warning: Support the door until securely fastened. Framery O Installation instructions info@frameryacoustics.com...
  • Page 45 Support the frame and install it with M8x35 bolts (6 pcs) and M8 washers (6 pcs). Tighten the bolts by hand. Open the door with one half of the handle to adjust the straightness of the pod. Framery O Installation instructions info@frameryacoustics.com...
  • Page 46 Tighten the M8x35 bolts (6 pcs) on the modules with a wrench. Note: Hold the door frame in the straight position while you tighten the bolts. Note: Make sure that you tighten the bolts in the correct order. Framery O Installation instructions info@frameryacoustics.com...

  • Page 47: Install The Door Handle

    Install the handle with the spindle attached to it into the lower mounting hole from the outside of the door. Note: Turn the screw holes on the handle to match to the ones in the door. Framery O Installation instructions info@frameryacoustics.com...
  • Page 48 Note: Turn the screw holes on the handle to correspond to the ones on the door. Note: Make sure that there is no gap between the cover plates and the door. Framery O Installation instructions info@frameryacoustics.com...
  • Page 49 Install the upper cover plates with M4x30 screws (2 pcs). Do not overtighten. Note: Make sure that you install the smooth cover plate to the outside. Make sure that you position the logo horizontally straight. Framery O Installation instructions info@frameryacoustics.com...

  • Page 50: Program The Master Code Into The Code Handle (Optional)

    To program the master code, hold the handle horizontally with the spindle pointing down. Press and hold buttons 1 and 4 until the LED flashes in red. When released, the LED lights up in green. Framery O Installation instructions info@frameryacoustics.com...

  • Page 51: Install The Code Handle (Optional)

    Insert the code handle with the spindle attached to it into the lower mounting hole from the outside of the door. Note: Make sure that the UP label at the base of the spindle is pointing upwards when inserting the handle. Framery O Installation instructions info@frameryacoustics.com...
  • Page 52 Install the upper cover plates with M4x30 screws (2 pcs). Note: Make sure that you install the smooth cover plate to the outside. To add up to 9 separate user codes, remove codes, or to change the master code, see the handle manufacturer's instructions. Framery O Installation instructions info@frameryacoustics.com...

  • Page 53: Install The Glass Wall

    Note: Make sure that the flat side of the guide pin goes into the mounting hole. Lift the glass wall as close to the pod as possible. Note: Make sure that the glass wall faces the right side up according to the sticker. Framery O Installation instructions info@frameryacoustics.com...
  • Page 54 Warning: Do not crush your fingers between the glass wall and the wall module or floor. Warning: Support the glass wall until securely fastened. Support the wall and install it with M8x35 bolts (6 pcs) and M8 washers (6 pcs). Tighten the bolts by hand. Framery O Installation instructions info@frameryacoustics.com...

  • Page 55: Install The Floor Cover Panels

    11.1 Install the floor cover panels Install the floor cover panels (2 pcs) with 5x60 countersunk screws (2 pcs each). Note: Place the countersunk holes upwards. Use the existing screw holes. Framery O Installation instructions info@frameryacoustics.com...
  • Page 56 Framery O Installation instructions info@frameryacoustics.com...

  • Page 57: Install The Interior

    12.1 Install the stool and carpet If you install the Tovi stool, cut open the carpet using the dashed lines underneath the carpet as reference. Note: Do not cut the carpet if you have not ordered the Tovi stool. Framery O Installation instructions info@frameryacoustics.com...
  • Page 58 Note: Make sure that the spindle is securely inside the seat. Place the stool into the mounting notch of the floor module. Install the stool with black M8x25 countersunk screws (6 pcs). Note: Make sure that the footrest is on the table side. Framery O Installation instructions info@frameryacoustics.com...

  • Page 59: Install The Carpet (No Stool)

    Note: Make sure that the carpet is firmly in place and that there are no bumps. 12.2 Install the carpet (no stool) Place the cover plate into the stool mounting notch of the floor module. Framery O Installation instructions info@frameryacoustics.com...
  • Page 60 Note: Make sure that the carpet is firmly in place and there are no bumps. Slide the ends of the carpet under the kick plates. Note: Make sure that the carpet is firmly in place and there are no bumps. Framery O Installation instructions info@frameryacoustics.com...

  • Page 61: Install The Power Cord From The Floor

    Install the power cord from the roof on page 62. Connect the AC extension cord and the power cord. Guide the power cord down the electrical channel. Note: Guide the power cord under the strain relief. Framery O Installation instructions info@frameryacoustics.com...

  • Page 62: Install The Power Cord From The Roof

    Connect the extension cord and the power cord. Install the power cord along the wire channel in the roof module up to the notch. Note: Make sure that the power cord runs on top of the insulation material in the roof module. Framery O Installation instructions info@frameryacoustics.com...

  • Page 63: Install The Cover Panels And Body Covers

    15 Install the cover panels and body covers 15.1 Install the wall cover panels Reinstall the wall cover panels (4 pcs) with 4x30 screws (2 pcs each). Place the countersunk holes upwards. Use the existing screw holes. Framery O Installation instructions info@frameryacoustics.com...

  • Page 64: Install The Roof Cover Panels

    Note: If you install for the first time, you need two extra screws per panel, in addition to the ones removed at the beginning of the installation. Install the two additional screws to the two vacant countersunk holes in the cover panels. 15.2 Install the roof cover panels Framery O Installation instructions info@frameryacoustics.com...

  • Page 65: Install The Bottom Body Covers

    Slide the left-hand bottom body cover under the pod. Install the lead-through rubber to the right-hand bottom body cover. Bend the rubber into shape before installing it. Note: You only have to do this when installing for the first time. Framery O Installation instructions info@frameryacoustics.com...
  • Page 66 Note: Align the body cover to the door frame. Make sure that there are no gaps between the body cover and the door frame. Make sure that the body cover is installed evenly and aligned correctly. Framery O Installation instructions info@frameryacoustics.com...
  • Page 67 Note: If you installed the power cord to the floor module, guide it through the lead-through and support it while sliding the body cover into place. Guide the body cover folds into the installation grooves. Framery O Installation instructions info@frameryacoustics.com...

  • Page 68: Install The Roof Body Covers

    Make sure that the body cover is installed evenly and aligned correctly. 15.4 Install the roof body covers Set the roof body covers into place one at a time. Framery O Installation instructions info@frameryacoustics.com...
  • Page 69 Note: Align the cover to the door frame. Make sure that there are no gaps between the body cover and the door frame. Make sure that the body cover is installed evenly and aligned correctly. Framery O Installation instructions info@frameryacoustics.com...
  • Page 70 Place the upper fold of the roof body cover into the installation groove on the right-hand side of the roof. Note: If you installed the power cord to the roof module, guide the power cord out of the cut in the cover. Framery O Installation instructions info@frameryacoustics.com...

  • Page 71: Install The Wall Body Covers

    Make sure that the body cover is installed evenly and aligned correctly. 15.5 Install the wall body covers Place the upper body cover fold against the wall module and slide it into the upper installation groove. Framery O Installation instructions info@frameryacoustics.com...
  • Page 72 Note: Make sure that the body cover is installed evenly and aligned correctly. Use a white rubber mallet to tap the wall covers into alignment if needed. Repeat the steps for the other wall body cover. Framery O Installation instructions info@frameryacoustics.com...

  • Page 73: Perform Final Checks

    If the door needs to be adjusted, see on page 73. 16.2 Adjust the door height Make sure that the door is vertically aligned correctly. If the door is not in the middle of the frame, adjust it. Framery O Installation instructions info@frameryacoustics.com...
  • Page 74 Remove the caps from the hinges. Open the door and loosen the set screws. Close the door. Framery O Installation instructions info@frameryacoustics.com...
  • Page 75 Note: After the initial installation, the door normally does not have to be lowered, but raised. Adjust the height setting of the lower hinge accordingly so that the load on both hinges is the same. Turn clockwise to raise and counter-clockwise to lower the setting. Framery O Installation instructions info@frameryacoustics.com...
  • Page 76 If the flashlight shines through the door seams, adjust the door. Repeat steps 4–6 if needed. Close the door. 10. Open the door and tighten the set screws when the adjustment is complete. Note: Make sure that both hinges have the same height setting. Framery O Installation instructions info@frameryacoustics.com...

  • Page 77: Finish The Installation

    11. Install the caps. 16.3 Finish the installation Clean the outer and inner surfaces with a mild alcohol-based cleaning solution and a lint-free cloth. Framery O Installation instructions info@frameryacoustics.com...
  • Page 78 Connect the power cord. Framery O Installation instructions info@frameryacoustics.com...
  • Page 79 Fill out the warranty checklist and send it to Framery. Note: The warranty is only valid with the filled-out warranty checklist. Framery O Installation instructions info@frameryacoustics.com...
  • Page 80 Framery O Installation instructions info@frameryacoustics.com...
  • Page 82 Framery O Installation instructions Patamäenkatu 7 33900 Tampere FINLAND VAT: FI 23527139...

Table of Contents

Save PDF