Modification Of The Cruise Speed; Changing The Inter-Vehicle Distance - CITROEN C4 Spacetourer Handbook

5. Display the list of memorised speeds or,
Use the speed suggested by the Speed
Limit recognition and recommendation
system.
6. Display and adjustment of the
programmed inter-vehicle distance.
For more information on Memorising speeds,
refer to the corresponding section.
For more information on Speed Limit
recognition and recommendation and its
memorisation, refer to the corresponding
section.
Displays on the instrument
panel
Information is grouped together on the
instrument panel.
7. Cruise control pause/resume indication.
8. Cruise control selection indication, or
vehicle speed adjustment phase.
9. Value of the programmed speed or
adjusted speed below the programmed
speed.
Operation
Switching on
Adaptive cruise control must be selected in the
Driving menu.
F Turn wheel 1 to the "CRUISE" position:
cruise control mode is selected but the
function is paused.
F Press one of the buttons 2 or 3: the current
speed of your vehicle becomes the cruise
speed setting.
The cruise control is activated (ON).
By default, the inter-vehicle time is set at
2 seconds.
Otherwise, the last setting made will be used
when switching on the system.

Modification of the cruise speed

- using buttons 2 or 3:
F by successive short presses, to change
in steps of + or – 1 mph (km/h),
F by a maintained press, to change in steps
of + or – 5 mph (km/h).
- pressing button 5:
F the six speeds memorised are displayed
in the touch screen,
F choose a speed setting: it is displayed on
the instrument panel.
The selection screen closes after a few
moments. The modification is then accepted.
- by pressing button 5, if your vehicle is
equipped with speed limit recognition:
F the speed to be memorised appears on
the instrument panel.
F press button 5 again to save the speed.
The value appears immediately on the
instrument panel.
For more information on Speed Limit
recognition and recommendation and its
memorisation, refer to the corresponding
section.
As a precaution, it is recommended that
you select a cruise speed setting close to
the current speed of your vehicle.
Changing the inter-vehicle
distance
Press button 6 to select a new inter-vehicle
distance setting from the three levels ("Close",
"Normal", "Distant").
This setting remains memorised, whatever the
state of the system.
Driving
6
153