Table of Contents
Advertisement
8.1 Continuing cooking after automatic
switch-off
9 Power manager
The power manager limits the maximum power con-
sumption of the appliance to the value specified on the
rating plate.
When the power limit is reached, the appliance auto-
matically selects the maximum possible heat settings.
The heat setting indicator shows the heat setting and
briefly .
10 Wipe protection
Wiping over the control panel while the hob is switched
on may alter settings. Your hob has a wipe protection
function to prevent this.
The main switch is excluded from the wipe protection
function. You can switch the hob off at any time.
11 Energy consumption display
This function indicates the total amount of energy con-
sumed between switching the hob on and switching it
off again.
Once switched off, the energy consumption is dis-
played in kilowatt hours, e.g. 1.08 kWh, for
10 seconds.
12 Basic settings
You can configure the appliance to meet your needs.
12.1 Overview of the basic settings
You can find an overview of the basic settings and the
default factory settings here.
Dis-
Selection
play
Automatic childproof lock
– Switched off
– Switched on
– Manual and automatic childproof lock are
switched off.
Signal tone
– Confirmation signal and operating error
signal are switched off. The main switch sig-
nal remains switched on.
– Only the operating error signal is
switched on.
– Only the confirmation signal is switched
on.
– Confirmation signal and operating error
signal are switched on.
1
Factory setting
1
1
Touch any control.
1.
a The display goes out.
Reset.
2.
10.1 Activating wipe protection
Touch
.
▶
a A signal sounds.
a The indicator lamp above
a The control panel is locked for 30 seconds.
The accuracy of the display depends on various factors
such as the voltage quality of the power supply.
The display can be activated in the basic settings.
→ Page 9
Dis-
Selection
play
Activation of the heating elements
– Switched off
– Switched on
– The last setting before switching off the
1
hotplate.
Time for selecting hotplates
– Unlimited: The last hotplate selected can
always be adjusted without having to select it
1
again.
– You can adjust the last hotplate selected
within 10 seconds after selecting it. After this
time you have to select the hotplate again be-
fore adjusting it.
Resetting to the factory settings
– Switched off.
– Switched on.
1
Factory setting
12.2 Changing basic settings
Requirement: The hob is switched off.
Switch on the hob.
1.
Power manager en
lights up.
1
9
Advertisement
Table of Contents
