Table of Contents
Advertisement
8.2 Kitchen timer
You can set a time of up to 99 minutes after which a
signal will then sound. The kitchen timer runs inde-
pendently of all other settings.
Setting the kitchen timer
Switch on the kitchen timer.
1.
There are 2 different ways of switching the kitchen
timer on.
If a hotplate has been
selected.
If a hotplate has not
been selected.
a The
indicator lights up.
Within the next 10 seconds set the required time on
2.
the control panel.
a The time counts down.
a When the time has elapsed, a signal sounds.
lights up on the timer display. The
the kitchen timer lights up brightly. It switches off
after 10 seconds.
Displaying the time
Select the kitchen timer with
▶
a The time is displayed for 10 seconds.
Setting the correct time
Select the kitchen timer with
1.
Set the required time on the control panel.
2.
Switching off the timer signal
You can switch the signal off manually.
Automatic switch-off
9 Automatic switch-off
If you do not change the settings of a hotplate for a
long time, automatic switch-off will be activated.
When the hotplate switches off depends on the heat
setting selected (1 to 10 hours).
The heat to the hotplate is switched off.
sidual heat indicator / flash alternately on the hot-
plate display.
Power manager
10 Power manager
The power manager limits the maximum power con-
sumption of the appliance to the value specified on the
rating plate.
Wipe protection
11 Wipe protection
Wiping over the control panel while the hob is switched
on may alter settings. Your hob has a wipe protection
function to prevent this.
The main switch is excluded from the wipe protection
function. You can switch the hob off at any time.
Touch
twice within
10 seconds.
Touch
.
indicator for
.
.
and the re-
Touch any touch field.
▶
a The display goes out and the audible signal ceases.
8.3 Setting the cooking time
Requirement: The hotplate is selected.
1.
Select the heat setting.
Touch
.
2.
a The
display for the hotplate lights up.
up on the timer display.
Touch the required presetting on the control panel.
3.
The possible presetting from left to right is 1, 2, 3.....
to 9 minutes.
Within the next 10 seconds slide your finger along
4.
the control panel until the required cooking time is
reached.
a The cooking time counts down. If you have set a
cooking time for more than one hotplate, the cook-
ing time of the hotplate selected is displayed.
a When the cooking time has elapsed, the hotplate
switches off. A signal sounds and
display for 10 seconds. The
brightly.
9.1 Continuing cooking after automatic
switch-off
Touch any touch field.
1.
a The display goes out.
Reset.
2.
When the power limit is reached, the appliance auto-
matically selects the maximum possible heat settings.
The heat setting indicator shows the heat setting and
briefly .
11.1 Activating wipe protection
Touch
.
▶
a A signal sounds.
a The indicator lamp above
Automatic switch-off en
lights
flashes on the
display lights up
lights up.
11
Advertisement
Table of Contents
