Connecting The Power Cord - Seagate Scorpion 40 Installation Manual

Scorpion 40 Installation Manual, Rev. A
Figure 9
SCSI termination examples for external Scorpion 40
Example 1: SCSI termination
in a system that has only
external SCSI devices.

Connecting the power cord

Attach the power cord securely to the power connector on the
back of the drive. The location of the power connector on the
external drive is shown in Figure 8 on page 16.
SCSI Terminators
External
Scorpion 40
External
SCSI device
SCSI Controller
(termination enabled)
External
SCSI device
External
Scorpion 40
SCSI Controller
(termination disabled)
Internal
SCSI device
( termination
enabled )
Example 2: SCSI termination
in a system that has both
internal and external SCSI
devices.
17