Install Remote Control Battery; Connect Additional Equipment - Philips 3000 Series User Manual

Install remote control battery

Caution
•
Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard batteries in fi re.
•
Risk of decreased battery life! Never mix different brands or types of batteries.
•
Risk of product damage! When the remote control is not used for long periods, remove the batteries.
•
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
For fi rst-time use:
1
Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert two RO3 AAA CARBON ZINC batteries 1.5V.
3
Close the battery compartment.

Connect additional equipment

Caution
•
Turn off your player before connecting to any additional equipment.
You can connect the player to a TV or an amplifi er to enjoy DVDs or Karaoke.
Match the color of the AV cables with the jacks: the yellow cable is for the yellow video jack, the
red/white cable is for the red/white audio jacks.
AV OUT
Tip
•
To conserve energy, press SOURCE and select AV IN mode to turn off the front panel display.
TV

