Install Remote Control Battery - Philips PD7015 User Manual

‡ Alternatively, press
» The CHR indicator turns on (red).
» When the battery is fully charged, the CHR indicator turns off.
Tip
‡
To maximize battery life, recharge the battery immediately once the battery is fully discharged. If
you do not use the player for a long time, fully recharge the battery once every two months.
Charge through the car adaptor
Connect the supplied car adaptor to the player and car cigarette lighter.

Install remote control battery

Caution
‡
5LVN RI H[SORVLRQ .HHS EDWWHULHV DZD\ IURP KHDW VXQVKLQH RU ÀUH 1HYHU GLVFDUG EDWWHULHV LQ ÀUH
‡
Risk of decreased battery life! Never mix different brands or types of batteries.
‡
Risk of product damage! When the remote control is not used for long periods, remove the
batteries.
‡
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
To install the remote control battery:
1
Open the battery compartment.
2
Insert one CR2025 battery with correct polarity (+/-) as indicated.
on the remote control to switch to standby mode.
EN 15